Browsing Tag

Crank Case

  • Engine

    Engine Rebuild #14 (Head Preparation)

    To prepare the CB750 motorcycle head for assembly onto the cylinder block, you’ll need the following: Open the valve drawing Reinstall the valve seats (drawing #: 24 / PN: 14775-410-010) Install…

  • Engine

    Engine Rebuild #13 (Cylinder Installation)

    Ok, big moment. I got the piston rods straightened, and am now placing the cylinders onto the motorcycle. Open up the cylinder drawing.  Everything I’ll refer to is using the drawing and…

  • Tips and Parts

    Tip #3 (Cylinder Stud Removal)

    These were the hardest pieces of hardware I needed to remove to disassemble the motorcycle.  One was missing when I bought the bike and I was going to a larger piston…

  • CB750 Engine
    Engine

    Engine Rebuild #8 (Engine Case Mating)

    Big Milestone! First real milestone on the old CB750. After several months of purchasing parts, learning my way around the engine, and getting the confidence; I’m rejoining the two halves of…

  • SOHC CB750 Case Bolts
    Engine

    Engine Rebuild #7 (Case Reassembly Prep)

    So, this is it.  Reassembly of the two halves of the Engine Case to combine the lower end of the CB750.  First big milestone of the rebuild.  It’s exciting to be…